2005 Toyota Tundra
Mileage
188,693
Service Date
1/21/2020
Services Performed
- Perform Brake Fluid Exchange. Drain Master Cylinder Reservoir. Remove All Four Wheels and Bleed Brakes at Each Caliper. Refill Master Cylinder Reservoir and Adjust Fluid Level as Required. Install all Four Wheels and Torque as Required.
- POWER STEERING HOSE – Remove & Replace – V8 Pressure & Return,Assembly,w/Cooler
- REMOVED FRONT WHEEL. DISCONNECT BRAKE LINE. REMOVED THE 2 MOUNTING BOLTS AND CALIPER. REMOVED CLIP WITH 2 PINS AND ANTI-RATTLE SPRING. REMOVED BOTH PADS AND 4 ANTI-SQUEAL SHIMS. PUT NEW CALIPER WITH BRAKE HOSE IN REVERSE INSTALLATION ORDER OF REMOVAL.
- REMOVED THE COTTER PIN AND LOCK CAP. REMOVED DRIVE SHAFT LOCK NUT. DISCONNECT THE LOWER SUSPENSION ARM FROM THE LOWER BALL JOINT. DISCONNECT DRIVE SHAFT FROM STEERING KNUCKLE. PUSHED THE STEERING KNUCKLE OUTWARD AND DISCONNECT THE DRIVE SHAFT FROM THE STEERING KNUCKLE. REMOVED OLD AXLE AND PUT IN NEW AXLE IN REVERSES ORDER OF REMOVAL.
ERICK A. gave our service a 5 star review on 1/28/2020