Mileage
159,051
Service Date
2/9/2023
Services Performed
- Remove Rear Wheels. Remove Rear Brake Calipers. Remove Rear Brake Rotors and Clean Contact Surface of Hub. Replace Rear Brake Rotors. Clean and Lubricate Rear Brake Caliper Slides. Apply BG Stop Squeal to Brake Pads. Install Rear Brake Pads and Sensors (if equipped). Road Test Car and Properly Seat Rear Brake Pads.
- Remve Front Whhels. Remove Front Brake Calipers. Remove Front Brake Rotors. Clean Contact Surface of Hub. Replace Front Brake Rotors. Clean and Lubricate Front Caliper Slides. Apply Bg stop Squeal To Brake Pads. Install Front Brake Pads and Sensors (if equipped). Road Test Car and Properly Seat Brake Pads.
- Perform Brake Fluid Exchange. Drain Master Cylinder Reservoir. Remove All Four Wheels and Bleed Brakes at Each Caliper. Refill Master Cylinder Reservoir and Adjust Fluid Level as Required. Install all Four Wheels and Torque as Required.
- VALVE COVER GASKET – Remove & Replace – V6 Both
- Remove Upper and Lower Engine Covers as Required. Drain Engine Oil. Replace Engine Oil Filter and Re-Fill Engine Oil with up to 12 Quarts of Synthetic Motor Oil. Check and Top Off Fluid Levels as Required when Possible. Check and Adjust Tire Pressures Including Spare (when possible) Perform Visual Courtesy Inspection and Report on Possible Work Needed.
David B. gave our service a 5 star review on 2/10/2023