- Scan on Board Computer Diagnostic System Using Scan Tools. Retrieve Fault Codes. Research Fault Codes and Test Components as Required. P2187- System too lean at idle Tech noticed the dip stick on the vehicle was not on correctly. Tech cleared any codes stored in the ecu and let vehicle run with the dip stick pushed down all the way. Tech did noticed the Vacuum pump leaking oil when vehicle was on. Spoke with the customer over the phone and related the message to the customer and what the vehicle will need at this time. The customer agreed with the repairs and to move forward with the fix. Tech replaced the parts that needed to be replaced. Tech test drove the vehicle and everything seems to be okay at this time.
- Remove Upper and Lower Engine Covers as Required. Drain Engine Oil. Replace Engine Oil Filter and Re-Fill Engine Oil with up to 12 Quarts of Synthetic Motor Oil. Check and Top Off Fluid Levels as Required when Possible. Check and Adjust Tire Pressures Including Spare (when possible) Perform Visual Courtesy Inspection and Report on Possible Work Needed.
- VACUUM PUMP – Remove & Install or Remove & Replace – Eng CD BPY
Samuel B. gave our service a 5 star review on 11/3/2021