- Add Liqui Moly Engine Flush to Engine Oil and Run Car for 20 Minutes @ 2,000 RPM. DRain Engine Oil. Replace Engine Oil Filter. Re Fill Engine Oil with up to 12 Quarts of Synthetic Motor Oil. Check and Top Off All Fluid Levels as Required. Check and Adjust Tire Pressures as Required. Perform Visual Safety Inspection and Report on Any Services Needed.
- Grind Down old Welds. Re weld exhaust Hangers (2) to Rear Tail Pipes.
- SPARK PLUGS – Remove & Replace – V6 All
- Perform Brake Fluid Exchange. Drain Master Cylinder Reservoir. Remove All Four Wheels and Bleed Brakes at Each Caliper. Refill Master Cylinder Reservoir and Adjust Fluid Level as Required. Install all Four Wheels and Torque as Required.
Brian C. gave our service a 5 star review on 5/4/2023